Merlyn Mind Audio Line-In User Guide

Contents

• Instructions
• Tested and recommended microphones
• Troubleshooting

Instructions

Step 1: Connect 3rd party audio device, e.g., wireless microphone for voice amplification, to Symphony Classroom using the Audio-in 3.5mm port.


Step 2: Enable Audio line-in by

• Clicking on the Symphony Classroom settings
• Navigate to Audio > Line-in using air-mouse
• Toggle to “on”

Adjust the volume on the microphone/external device and SC to optimize between sufficient volume level and to avoid microphone feedback. You can also independently change the line-in volume using the volume slider in the audio line-in screen.

Tested and recommended microphones

• R0DE Wireless Go II

Troubleshooting

• If there is too much ‘echo’, try toggling line-in (off and on) once.
• If there is crackling, try toggling line-in (off and on) once.